TITLE
    LaserWriter 12/640 PS: Communication Switch Settings
Article ID:
Created:
Modified: 		20288
8/14/96
1/24/01
TOPIC

    This article contains the settings for the communication switch on the back of the LaserWriter 12/640 PS printer.

DISCUSSION

    The following table shows the default communication settings.

    Normal (in) Switch Position

    Port Network Protocol Mode Default
    LocalTalk LocalTalk PostScript PostScript
    Ethernet EtherTalk PostScript, off PostScript
    Ethernet NetWare PostScript, PCL5, Auto, off Auto
    Ethernet TCP/IP PostScript, PCL5, Auto, off Auto
    Parallel TBCP PostScript, PCL5, Auto, off Auto
    Parallel Normal PostScript, off PostScript
    Parallel Raw PostScript, PCL5, Auto, off Auto

    Reset (out) Switch Position
    Port Network Protocol Mode
    LocalTalk LocalTalk PostScript
    Ethernet EtherTalk PostScript
    Ethernet NetWare Auto Select
    Ethernet TCP/IP Auto Select
    Parallel Parallel Auto Select

    Note: When the communication switch is set in the Reset position, a startup page is printed each time the printer is turned on and the Extended Job Status settings are removed.


Document Information
Product Area: Printers
Category: LaserWriters
Sub Category: LaserWriter 12/640 PS

Copyright © 2000 Apple Computer, Inc. All rights reserved.